Tools Required - R&G LP0115 Instructions De Montage

LEGEND
ITEM 1 = SMALL CABLE TIES (x2).
ITEM 2 = M5 WASHERS (x8).
ITEM 3 = M5 NYLOC NUTS (x4).
Page | 2
ITEM 4 = M5x50mm LONG BUTTON HEADED BOLTS (x2).
ITEM 5 = FRONT SPACERS 25mm LONG (S0478) (x2).
ITEM 6 = RUBBER GROMMET (RB0002) (x1).
ITEM 7 = LICENCE PLATE BRACKET (TB0115) (x1).
ITEM 8 = M5x30mm LONG BUTTON HEADED BOLTS (x2).
ITEM 9 = MINI INDICATOR ADAPTORS (I0033) (x4).
ITEM 10 = LICENCE PLATE ILLUMINATOR KIT (LA0002) (x1).
ITEM 11 =150mm LENGTH OF HEAT SHRINK (x3).
ITEM 12 = SELF ADHESIVE CLIPS (CLIP 1) (x3).
ITEM 13 = REFLECTOR (x1).
ITEM 14 = REAR SPACERS 11.5mm LONG WITH ANGLED FACE (S0479) (x2).
Please note that in cases where kits are packed with rubber washers holding the components onto
the bolt – the rubber washers should be thrown away!

TOOLS REQUIRED


Set of long series metric Allen keys to include 3 and 4mm A/F size.

Socket set to include 8mm A/F socket, T20 Torx's bit and wrench.

8mm spanner.

Electrical plier's/crimps.

Small amount of superglue.
1 2
PICTURE PICTURE
R&G Racing
Unit 1, Shelley's Lane, East Worldham, Alton, Hampshire, GU34 3AQ
Tel: +44 (0)1420 89007 Fax: +44 (0)1420 87301 www.rg-racing.com Email: info@rg-racing.com