Safety Instructions - Nuova Simonelli TALENTO Notice D'instructions

2.

SAFETY INSTRUCTIONS

This manual is an integral and essential
part of the product and must be given to
the user. Read this book carefully. It pro-
vides important information concerning
safety of installation, use and mainte-
nance. Save it carefully for future refer-
ence.
After unpacking, make sure the appliance
is complete. In case of doubts, do not use
the appliance, but consult a qualified
technician. Packaging items which are
potentially dangerous (plastic bags, poly-
styrene foam, nails, etc.) must be kept out
of children's reach and must not be dis-
posed of in the environment.
RISK OF POLLUTION
Before connecting the appliance make sure
the rating plate data correspond with the
mains. The nameplate is located on the back
of the machine, on the left-hand side at the
bottom. The appliance must be installed by
qualified technicians in accordance with cur-
rent standards and manufacturer's instruc-
tions.
The manufacturer is not liable for any dam-
age caused due to failure to ground the
system. For the electrical safety of the appli-
ance, it is necessary to equip the system
with the proper grounding. This must be car-
ried out by a qualified electrician who must
ensure that the electric power of the system
is sufficient to absorb the maximum power
input stated on the plate.
34
In particular you must ensure that the size
of the wiring cables is sufficient to absorb
power input. The use of adapters, multiple
sockets or extensions is strictly forbid-
den. If they prove necessary, call a fully
qualified electrician.
This appliance is not suitable for use by
children or people with reduced physical,
sensory or mental capabilities or by peo-
ple without the proper experience, unless
correctly supervised and instructed.
This machine can be installed in loca-
tions such as service areas for staff in
shops, offices and other work environ-
ments, in farm holiday accommodation,
and in guest areas in hotels, motels, bed
and breakfast establishments and other
residential facilities.
When installing the device, it is neces-
sary to use the parts and materials sup-
plied with the device itself. Should it be
necessary to use other parts, the installa-
Fig. 3
tion engineer needs to check their suita-
bility for use in contact with water for
human consumption.
This machine must be installed according
to the applicable federal, state, and local
standards (codes) in force with regard to
plumbing systems including backflow
prevention devices. For this reason, the
plumbing connections must be carried
out by a qualified technician.
The device needs to be supplied with
water that is suitable for human consump-
tion and compliant with the regulations in
force in the place of installation. The
installation engineer needs confirmation
from the owner/manager of the system
that the water complies with the require-
ments and standards stated above.
EN
Fig. 4