Steam Ironing - Russell Hobbs 14733 Mode D'emploi

Please Note: If the instructions on the fabric label differ from this guide, follow the
instructions on the label.
REDUCIING TEMPERATURE:

Reducing the temperature takes a bit longer, as the element has to lose the heat
it has built up, so be patient. It's best to organise your ironing so that you don't
need to reduce the temperature.

STEAM IRONING:


When steam ironing, you must set the temperature control at

If you don't, you'll get water on your clothes, not steam.

Move the steam control to the setting you want,
(#3).

Wait until the thermostat light goes out then start ironing.
SPRAY:
Water spotting affects some fabrics. Test this out on a
hidden part of the fabric.

This works with dry or steam ironing, as long as
there's water in the reservoir.

Check that there's water in the reservoir.

Lift the iron off the fabric.

Aim the spray nozzle at the fabric.

Press the button.
= no steam,
6
or higher.
= high steam