Steam Ironing - Russell Hobbs 14845 Instructions

Please Note: If the instructions on the fabric label differ from this guide, follow the
instructions on the label.
REDUCIING TEMPERATURE:
Reducing the temperature takes a bit longer, as the element has to lose the heat
•
it has built up, so be patient. It's best to organise your ironing so that you don't
need to reduce the temperature.

STEAM IRONING:

When steam ironing, you must set the temperature control at
•
If you don't, you'll get water on your clothes, not steam.
•
Check that there is water in the reservoir.
•
The iron will adjust the amount of steam automatically.
•
Wait until the thermostat light goes out then start ironing.
•
SPRAY:
Water spotting affects some fabrics. Test this out on a
hidden part of the fabric.
This works with dry or steam ironing, as long as
•
there's water in the reservoir.
Check that there's water in the reservoir.
•
Lift the iron off the fabric.
•
Aim the spray nozzle at the fabric.
•
Press the
•
You may have to press it 2 or 3 times to pump water through the system.
•
button.
6
or higher. (#3)