Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

PREPARATION:

Check for textile care symbols
Iron fabrics needing low temperatures
temperatures
FILING (#2):
You may use the iron with tap-water, but if you live in a hard water area, you
should use distilled water (not chemically descaled or softened water).
If you buy distilled water, check that it's marketed as suitable for use in irons.
Unplug the iron.
Turn the temperature control to ●, slide the steam control to
Hold the iron with the soleplate down (#2).
Lift the bottom of the water inlet cover to open it.
Pour slowly, to let the air in the reservoir escape,
otherwise you will cause an air lock and the water
will overflow.
Don't fill past max, or water will escape in use.
Wipe up any spillage.
SWITCH ON:
Turn the temperature control to ●.
Place the iron on its heel.
Put the plug into the power socket (switch the socket on, if it's switchable).
Turn the temperature control to bring the setting you want next to the
(#3).
The thermostat light will come on.
When the iron reaches the temperature you set, the thermostat light will go off.
It'll then cycle on and off as the thermostat operates to maintain the temperature.
TEMPERATURE SETTING GUIDE:
, and finish with those needing high temperatures
5
.
first, then those that need medium
.
(#3).
mark

Publicité

Table des Matières
loading

Table des Matières