When the reservoir is empty, release the self clean button.
Unplug the iron, and place it on its heel to cool.
When it's cold, wipe off any moisture.
Store the iron on its heel, to avoid corrosion and damage to the soleplate.
ANTI-SCALE:
The anti-scale agent incorporated in the iron helps prevent the build-up of scale.
Don't use a descaling solution, or you'll destroy the anti-scale agent.
CLEANING AND MAINTENANCE
Unplug the iron when not in use, before moving and before cleaning. Let it cool
down fully before cleaning and storing away.
Remove spots from the soleplate with a little vinegar.
This appliance is for household use only and is not user-serviceable.
Do not open or change any parts by yourself. Please refer to a qualified electrical
service department or return to the supplier if servicing is necessary.
Always remember to unplug the unit from the electrical outlet when not in use
and before cleaning. Ensure that the speed control is set to "0".
It is much easier to clean the accessories directly after they have been used.
Wash them in warm, soapy water, rinse and dry well.
The body of the appliance and the stand should be cleaned with a damp cloth.
Do not let water enter the appliance or the stand.
Do not use bleach or other abrasive substance or solvents to clean your
appliance as it can be damaging to the finish.
Do not immerse the appliance in water or any other liquid, or hold it under a
running tap to clean.
STORING THE APPLIANCE
Unplug the unit from the wall outlet and clean all the parts as instructed above.
Ensure that all parts are dry before storing.
Store the appliance in its box or in a clean, dry place.
Never store the appliance while it is still wet or dirty.
Never wrap the power cord around the appliance.
9