Additional Safeguards; Parts Diagram; Before Using For The First Time - Russell Hobbs 14733 Mode D'emploi

ADDITIONAL SAFEGUARDS


Take care not to scratch the soleplate – avoid buttons, zips, etc.

The iron has a protective thermal fuse, which will blow if it overheats. If this
happens, the iron will stop working, and must be returned for repair.

Don't use the iron if it's dropped or damaged, or if it malfunctions or leaks.

If the cable is damaged, return the iron, to avoid hazard.

PARTS DIAGRAM

OPERATING INSTRUCTIONS

BEFORE USING FOR THE FIRST TIME:


Don't worry if the iron smokes a bit at first, it'll stop as the element cures.

Iron an old piece of cotton fabric, to clean the soleplate.

Press the button 3 or 4 times, to check it out.

Press the button 3 or 4 times, to check it out.
4