Vehicle Preparation - Subaru H001SAN000 Instructions D'installation

4

VEHICLE PREPARATION

1. Using a 10mm socket/ratchet, disconnect the negative
battery cable. (FIGURE A)
NOTE: Do not disconnect the battery terminal from
the battery post.
2. Open the glove box and press inward on the sides of
the glove box to disengage the retaining tabs from the
glove box inner cover. Disconnect the strut to remove
the glove box. (FIGURE B)
3. Using a panel removal tool, carefully press downward
to disengage three (3) pressure clips to remove the
passenger's side under dashboard fi nisher panel.
(FIGURE C)
ISSUE
PART NUMBER
H001SAN000
DATE
00
12 Sept 2019
FIGURE A
Glove Box Strut
FIGURE B
FIGURE C
SUBARU OF AMERICA
2 OF 12