Vehicle Preparation - Subaru H101SSJ000 Instructions D'installation

4

VEHICLE PREPARATION

1. Using a 10mm socket/ratchet, disconnect the negative
battery cable. (FIGURE A)
NOTE: Do not disconnect the battery terminal from
the battery post.
2. Open the glove box and press inward on the sides of
the glove box to disengage the retaining tabs from the
glove box inner cover. Disconnect the strut to remove
the glove box. (FIGURE B)
3. Using a panel removal tool, carefully remove the right
side dashboard panel by starting at the bottom access
notch and working upward to disengage four (4) pressure
clips. (FIGURE C)
ISSUE
PART NUMBER
H101SSJ000
DATE
-
21 Dec 2021
FIGURE A
FIGURE B
FIGURE C
SUBARU OF AMERICA
2 OF 10