Additional Safety Instructions - FUXTEC EA920 Mode D'emploi

the hedge trimmer always fit the cutting device cover. Proper handling of the hedge trimmer will
reduce possible personal injury from the cutter blades.
◼
Hold the power tool by insulated gripping surfaces only, because the cutter blade may contact hidden
wiring. Cutter blades contacting a "live" wire may make exposed metal parts of the power tool "live"
and could give the operator an electric shock.
◼
Carry the hedge trimmer by the handle with the cutter blade stopped. When transpor- ting or storing
the hedge trimmer always fit the cutting device cover. Proper handling of the hedge trimmer will
reduce possible personal injury from the cutter blades.
◼
Hold the power tool by insulated gripping surfaces only, because the cutter blade may contact hidden
wiring. Cutter blades contacting a "live" wire may make exposed metal parts of the power tool "live"
and could give the operator an electric shock.

Additional safety instructions

◼
This unit is not designed to be used by persons who have limited physical, sensory or mental abilities
or who have inadequate experience and/or knowledge of the unit, unless they are supervised by a
person responsible for their safety or they have been instructed by the person how to use the unit.
Children should be supervised to ensure that they do not play with the unit.
◼
Switch the unit off and remove the battery under the following conditions:
− if the unit is left unattended;
◼
Use the unit in dry conditions only. Protect it from rain and moisture.
◼
Ensure that the cutter does not touch the ground or other objects.
◼
Wait until the electric power tool has come
− before checking, cleaning or performing other work on the unit;
− if the unit starts vibrating excessively.
◼
While cutting, ensure that there are no persons (particularly children) or animals in the working area.
Ensure that children do not play with the unit.
◼
Before switching on the hedge trimmer, ensure that the working area is free of stones and pieces of
wire. Look out for them while cutting and search the hedge for concealed objects, such as wire fences.
Beware of overhead power lines.
◼
Use the unit only in daylight or in good artificial lighting.
◼
to a standstill before putting it down.
◼
When interrupting work, never leave the unit unattended and keep it in a safe place.
◼
Always switch the hedge trimmer off before transporting it to other workplaces.
◼
Never grasp the blade of the hedge trimmer.
◼
Ensure that all guards and handles are fitted before using the unit. Never attempt to switch on an
incompletely assembled unit or a unit which has unauthorised modifications.
Original-Bedienungsanleitung FUXTEC_EA920_rev01
_______________________________________________
30