Inserting/Replacing The Battery - FUXTEC EA920 Mode D'emploi

Inserting/replacing the battery

Charging the battery as described in the user manual of the charger.
◼
Press the charged battery into the power tool until it clicks into place.
◼
To remove, press the release button (1.) and pull out the battery (2.).
◼
Protect the battery contacts when the battery is not being used. Loose metal parts may short-circuit the
contacts – Explosion and fire hazard!
Switching on/off the power tool
Switching on
First press and hold the switch interlock (1.).
◼
Then press the On/Off switch (2.).
◼
Original-Bedienungsanleitung FUXTEC_EA920_rev01
_______________________________________________
38