Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
7.5 HOLD FUNCTION |
(Once the object is retired from the plate, the display maintains the weight fixed until press the Key
Note; if you activate the hold mode, not can use the function limits and accumulation.
weighing of animals).
1. Press the key
to access to the parameter.
2. Press the key
to choose the desired mode.
3. Press the key
to confirm.
MODES:
HOLD 0
: Deactivated.
•
HOLD 1
: Animal in movement
•
HOLD 2
: Value of peak
•
HOLD 3
: Hold steady
•
HOLD 4
: Hold steady with self cancelling at zero.
•
HOLD 1
.
•
When the user can access this parameter, the screen shows the message
•
Use the keys
choose a number from 001 to 100.
•
Press the key
It will appear on the screen the message
•
the number of times you want to repeat during the range of hold.
•
Press the key
7.6 ACCUMULATION|
FORMAT OF THE DATA
232 1
232 2
232 3
232 4
232 5
232 6
232 7
Connection sending and manual accumulation, passing by zero and pressing the key
set to 0, press the key
232 8
Connection sending and manual accumulation, passing by zero and pressing the key
set to 0, press the key
Connection sending and manual accumulation, passing by zero and pressing the key
232 9
set to 0, press the key
232 10
Connection sending and manual accumulation, passing by zero and pressing the key
set to 0, press the key
UF-5
and
to move the cursor and the key
to confirm.
time 8,
to confirm. Example: PCt small and big time means more accuracy and longer stabilization..
UF-6
NO FUNCTION ABD
NO FUNCTION ABD
twice and removed from weighing memory.
twice and removed from weighing memory.
twice and removed from weighing memory.
twice and removed from weighing memory.
PCt
,
to choose the desired value of the range of HOLD, you can
use the keys
and
USER'S MANUAL ABD
,This function is very useful for the
to move the cursor and the key
. When the display is
. When the display is
. When the display is
. When the display is
EN
to choose
33
Publicité
Table des Matières
