Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
DISPLAY
LF3
W0
W1
W2
W3
W4
LF3
VELOCIDAD DEL CONVERTIDOR AD
SPEED 1 standard speed 15Hz.
SPEED 2 high speed 30Hz.
SPEED 3 low speed 7.5Hz
*This function stays blocked when UF-5 is in mode HOLD 1.
*The value of factory is 1
DISPLAY
LF4
SPEED 1
LF 4
38
DESCRIPTION AND SEQUENCE OF USE
•Press the Key
to start or the key
matically.
•Press the Key
to calibrate the zero.
( press the key
to exit from the calibration and go back to the menu LF3)
• Place 1/3 of the maximum weight on the plate and press
(press the key
to exit from the calibration and go back to the menu LF3).
•Place 2/3 of the maximum weight on the plate and press
(press the key
to exit from the calibration and go back to the menu LF3).
•Place the maximum weight on the plate and press the key
(press the key
to exit from the calibration and go back to the menu LF3).
•Press the key
to complete the lineal calibration. (press the key
bration and go back to the menu LF3)
•Use the keys
,
and then the key
key
to exit from the menu and the scale will begin again automatically.
LF 4
DESCRIPTION AND SEQUENCE OF USE
•Press the key
to start or the key
again automatically.
•Use the key
and then the key
to exit from the configuration and go back to the menu LF4)
•Use the keys
,
and then
to exit from the menu and the scale will start again automatically.
USER'S MANUAL ABD
to exit the menu and the scale will start again auto-
to calibrate 2/3 th the capacity.
to calibrate 2/3 th the capacity.
to calibrate the full capacity.
to continue with other adjustments and press the
to exit from the menu and the scale is going to begin
to select the speed of the AD converter ( press the key
. To continue with the other adjustment and press the key
EN
to exit from the cali-
Publicité
Table des Matières
