Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
CALIBRATION OF THE WEIGHT
DISPLAY
LF 1
CAL Z
150.00 kg
150.00 kg
150.00 kg
CONFIGURATION
DISPLAY
FIRST STEP
262144
SECOND STEP
1 0 0 0 0 1
A B C D E F
THIRD STEP
000000kg
FOURTH STEP
dP 0.0
36
LF 1
The calibration can be done with any weight, but the weight ca not be inferior to 1/100 of the
maximum capacity and it must also never be exceeded.
•Press the key
to start the calibration of zero ( press
to the menu LF1)
•Use
,
and
calibration will be done. ( press the key
•Place the required weight on the scale as it is indicated in the display.
•Once everything is steady, press the key
tion and go back to the menu LF1).
THE CALIBRATION IS GOING TO FINISH AND THE SCALE WILL GO VACK TO THE WEIGHING MODE AUTOMATICALLY.
LF 2
DESCRIPTION AND SEQUENCE OF USE
•DISPLAY OF THE INTERNAL COUNTING
•POSSIBLE VALUES OF THE PARAMETERS
A: Metric system
0:NO
B: American system
0:NO
C: other unities
0:NO
D: PCS
0:OFF
E: double range
0:OFF
F: units of calibration
lb oz cannot be selected as unities of calibration.
The scale won't let us continue up to the next step if there is a mistake during the programming.
•Use
,
and
TY.
•Use the Keys
,
to change the position of the DECIMAL POINT.
d 0.00
d 0.000
DESCRIPCIÓN y SECUENCIA DE USO
0 ~ 9
,
and then
pto introduce the weight with which the
to exit the calibration and go back to the menu LF1)
to calibrate it ( press the key ESC to exit the calibra-
1: kg
1: lb
1: TW kg
1: ON
1: multi interval
1:use metric
unities
0 ~ 9
,
and then press
d 0.0000
USER'S MANUAL ABD
to exit the calibration and go back
2:T
3:g
2:lb oz
2:HK kg
3:VISS
2:multi range
2:use american unities
to introduce THE MAXIMUM CAPACI-
0.00000
EN
Publicité
Table des Matières
