B.A. International BA ULTIMATE POWER + Notice D'utilisation page 50

6401553.book Seite 48 Montag, 13. Juni 2016 4:27 16
7 Conditioning
48
Operating Instructions BA ULTIMATE POWER + / BA ULTIMATE
Steam sterilizers that meet the requirements of EN 13060, class B or S,
without DAC PROFESSIONAL_Instrument
and are also suitable for the sterilization of straight/contra-angle
handpieces are approved.
NOTICE! Do not exceed 140°C (284°F), even during the drying phase.
After sterilizing
After sterilizing - heading
1. Remove the instrument from the steam sterilizer immediately.
Subsequent steps_instruments
CAUTION! The instrument is hot. Risk of burns!
NOTICE! Do not attempt to accelerate the cooling process by
immersing the instrument in cold water. This can damage your
instrument.
2. Store all instruments so that they are protected from contamination.
3. Sterilize again once the storage period has elapsed.
64 01 553 D3551.201.03.03.02