Left Side - R&G CP0423BL Instructions De Montage

CP0423

LEFT SIDE

LEGEND
ITEM 1 = CRASH PROTECTOR CAPS (BC0002) (x2).
ITEM 2 = M10x1.25x110mm LONG HEX HEAD BOLT (x1).
ITEM 3 = M10 WASHERS (x2).
ITEM 4 = SPACER (S0293) (5mm LONG) (x2).
ITEM 5 = LOCK-WASHERS (LW0001) (x2).
ITEM 6 = CRASH PROTECTOR (B0472 with CS449) (x2).
ITEM 7 = SPACER (S01022) (42mm LONG) (x1).
ITEM 8 = MARKING TOOL (T0011) (x1).
ITEM 9 = SPACER (S01021) (34mm LONG) (x1).
ITEM 10 = M10x1.25x100mm LONG HEX HEAD BOLT (x1).
Please note that in cases where kits are packed with rubber washers holding the components
onto the bolt – the rubber washers should be thrown away!
TOOLS REQUIRED

Socket set to include 4, 5 & 8mm A/F socket and wrench.

Socket set to include 17mm socket and wrench.

Flat head screwdriver.

28mm Hole-saw and/or dremmel type tool.

Torque wrench (up to 40N/m).
TOWARDS REAR TOWARDS FRONT
OF BIKE OF BIKE
PICTURE C
R&G Racing
Unit 1, Shelley's Lane, East Worldham, Alton, Hampshire, GU34 3AQ
Tel: +44 (0)1420 89007 Fax: +44 (0)1420 87301 www.rg-racing.com Email: info@rg-racing.com