GYS TIG 250 AC/DC Mode D'emploi page 24

TIG DC process DC
SYNERGIC process SYN
Standard mode STD
Pulse mode PULSE
Spot mode SPOT
2T 2T
4T 4T
4T LOG 4T LOG
Languages
Interface lock
Interface unlock
Password modification
Parameters reset RESET
Identification ID
Backup menu
Save
Save as
Open
Delete
Welding current when
a remote control is Current
connected
Cooling unit
Presence of a torch
with potentiometer
Presence of a remote
control
Thermal protection
ELECTRODE WELDING (MMA PROCESS)
CONNECTIONS AND RECOMMENDATIONS
• Connect the cables, electrode holder and earth clamp in the connectors,
• Respect the welding polarities and intensities indicated on the electrodes boxes,
• Remove the electrode from the electrode holder when the machine is not in use.
MMA WELDING PROCESSES
MMA PRO
PRO mode gives access to all product functions and settings.
EASY mode allows for a simplified interface with a single current setting.
24
TIG 250 AC/DC
X
X X
X X
X X
X X
X X 2T (time) torch mode
X X 4T (time) torch mode
X X 4T (time) LOG torch mode
X X X Language selection
X X X Locking the interface to prevent access to menus and parameters
Unlocking the interface to allow access to menus and parameters (default
X X X
code: 0000)
X X X Allow the modification of the password
X X X Allow to restore to factory settings
X X X After Sales module to identify the machine
X X X Menu to access to welding parameters features.
X X X Save the welding settings under the existing name.
X X X Save the welding parameters under a new name.
X X X Open an existing saved setting
X X X Delete an existing saved setting
X X X Current value adjustement when a remote control is present.
X X X Cooling unit
X X Presence of a torch with potentiometer
X X X Pictogram signalling that a remote control presence
X X X Pictogram signalling thermal protection mode
MMA EASY
EN