Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
FINAL SETUP
(continued)
CAUTION
properly installed on top of the base, then retest. Use caution when handling the burner head.
They can be very hot.
Turn down the control knob to the LOW (and SIM,
where applicable) setting to check function.
Burner Adjustment procedure is shown on the
following page.
Check each burner individually, then check that they
operate satisfactorily with other burners on.
If after all the above tests still result in mostly yellow
flames, or the burners do not light, contact Hestan
Customer Service to schedule a service call.
If you attempt to measure the inner cone of the flame, please use
caution. Burns could result. If after a few minutes the flames
continue to burn mostly yellow, verify that the burner head is
Figure 26. Burner flame appearance
COOKTOP BURNER
Figure 25. Burner flame size
©2019 Hestan Commercial Corporation
EN
1/2" to 3/4"
23
Publicité
Table des Matières
