hestan KGC30 NG/-LP Manuel D'installation page 17

GAS CONNECTION
5) For KGC30, turn the knob for the test burner to HI.
For KGC36, turn the knob for the test burner to SIM.
6) Check if the cooktop has the correct pressure
7) Turn the control knob OFF.
8) Remove the gauge and re-install the orifice.
Put the gas spreader, burner cap, and grate back into position.
Figure 16. Regulator pressure test
port (KGC30)
(continued)
A
B
C
A
B
C
Figure 17. Regulator pressure test
port (KGC36)
©2019 Hestan Commercial Corporation
EN
15