LOCATION AND INSTALLATION
Step 1
Remove packaging materials and
literature package from the cooktop
EN
before beginning installation.
Remove installation instructions from
literature pack and read them carefully
before you begin.
Step 2
Foam tape is provided to seal the
cooktop edges to the countertop. Apply the provided foam tape to the underside of the
cooktop edge.
Use tape around the entire cooktop perimeter.
Trim the tape ends so they meet closely.
10
©2019 Hestan Commercial Corporation
Figure 12. Apply Foam tape
(continued)
Figure 11. Package Contents
MANUAL
GASKET
GAS CONVERSION KIT
GAS CONNECTION KIT
PRESSURE
REGULATOR
COOKTOP
GRATES
CARDBOARD