Calling Charge Per Msn; Total Call Charge; Connected Line Identification Restriction (Colr) - Topcom Butler 5070 Mode D'emploi

Butler 5070

8.10.1. Calling charge per MSN

You can delete or view the call charge per MSN, total or last call.
- Press MENU when the unit is in standby mode..
- Select COSTS by using the UP- and DOWN keys.
- Enter the Base Pin code BS_PIN?:
- Press OK to confirm.
- Select COST PER MSN by using the UP- and DOWN keys.
- Press OK to confirm.
- Select the desired MSN by using the UP- and DOWN keys.
- Press OPT. to confirm.
- Select the DISPLAY, LAST CALL or DELETE by using the UP- and DOWN keys
- Press OK to confirm or ESC to leave the setting.

8.10.2. Total call charge.

To view or delete the total telephone cost for the ISDN line
- Press MENU when the unit is in standby mode.
- Select COSTS by using the UP- and DOWN keys.
- Press OK to confirm
- Enter the Base Pin code BS_PIN?:
- Press OK to confirm.
- Select TOTAL COSTS by using the UP- and DOWN keys.
- Press OK to confirm.
- Select the DISPLAY or DELETE by using the UP- and DOWN keys
- Press OK to confirm or ESC to leave the setting.

8.11. Connected Line Identification Restriction (COLR)

When you have assigned more then one MSN number to a handset and have set the standard MSN
number , this handset will transmit the standard MSN number to the calling party as soon as the call is
answered. To disable this feature and activate 'COLR: connected line identification restriction).
- Press MENU when the unit is in standby mode
- Select ISDN SETTING by using UP – and DOWN keys.
- Press OK to confirm
- Select COLR by using UP and DOWN keys
- Press OK to toggle between activate (✔ is displayed) or deactivate ( - )
- Press ESC to leave the settings
9.TECHNICAL DATA
• Standard:
• Frequency range:
• RF channels:
• Channel Bandwidth:
• Modulation:
• Transmission Output Power:
• Antenna diversity supported Base Station
• Data Transmission Rate:
• Speech coding:
• Communication Range (max.):
• Power Supply:
All manuals and user guides at all-guides.com
DECT ( Digital Enhanced Cordless Telecommunications )
GAP ( Generic Access Profile )
1880 ~~ 1900 MHz (BW=20MHz)
1920 ~~ 1940 MHz (BW=20MHz)
10 channels
1.728
GFSK
10Mw
1.152 Mbps
ADPCM 32 K bps
Outdoor 300 Meters - Indoor 50 Meters
90