Incoming Call Filter; Filter Function; Adding A Telephone Number To The Filter List; Changing Or Removing A Number In The Filter List - Topcom Butler 5070 Mode D'emploi

Butler 5070
8.6.

Incoming Call Filter

You can make a list of 10 telephone numbers. Depending on the filter setting, you can block all calls
except the programmed numbers or allow all calls except the programmed numbers.

8.6.1. Filter function

The filter function can be set to blocked and accept
If BLOCKED, incoming calls of all the phone numbers in the Filter List will not be signalized, all other
calls will ring
If ACCEPT, only the incoming calls of the phone numbers in the Filter List will be signalized, all other
will not ring.
- Press MENU when the unit is in standby mode..
- Select BASE SETTING by using the UP- and DOWN keys.
- Press OK to confirm
- Enter the Base Pin code BS_PIN?:
- Press OK to confirm.
- Select CALL FILTER by using the UP- and DOWN keys.
- Press OK to confirm.
- Select MODE by using the UP- and DOWN keys.
- Press OK to confirm.
- Select the desired filter function by using the UP- and DOWN keys.
BLOCKED: BLOCK ALL INCOMING CALLS IN LIST
ALLOW ONLY: ONLY ALLOW INCOMING CALLS FROM LIST
- Press OK to activate the mode
- Press ESC to leave the setting.

8.6.2. Adding a telephone number to the Filter List

- Press MENU when the unit is in standby mode..
- Select BASE SETTING by using the UP- and DOWN keys.
- Press OK to confirm
- Enter the Base Pin code BS_PIN?:
- Press OK to confirm.
- Select CALL FILTER by using the UP- and DOWN keys.
- Press OK to confirm.
- Select ENTER NUMBER by using the UP- and DOWN keys.
- Press OK to confirm.
- Press OPT.
- Select NEW by using the UP- and DOWN keys.
- Press OK to confirm.
- Enter the number NEW:
- Press OK to confirm.
- Press ESC to leave the setting.

8.6.3. Changing or removing a number in the Filter List

- Press MENU when the unit is in standby mode..
- Select BASE SETTING by using the UP- and DOWN keys.
- Press OK to confirm
- Enter the Base Pin code BS_PIN?:
- Press OK to confirm.
- Select CALL FILTER by using the UP- and DOWN keys.
- Press OK to confirm.
- Select ENTER NUMBER by using the UP- and DOWN keys.
- Select the desired number to edit or delete by using the UP- and DOWN keys.
All manuals and user guides at all-guides.com
87