Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
4. Insert drain hose through hole cut in cabinet to the front center
of opening where drain connection will be made.
A. Drain hose
**Parts available from local plumbing supply stores.
Option 3: Waste Disposer - no air gap
1. Remove the disposer knockout plug. Do not cut end of drain
hose.
2. Attach drain hose to disposer inlet with large springtype
clamp.
This connection must be before the drain trap and at least 20"
(50.8 cm) above the floor where dishwasher will be installed. It
is recommended that the drain hose be looped up and
securely fastened to the underside of the counter.
A
D
A. Large spring-type
clamp
B. Drain hose
3. Insert drain hose through hole cut in cabinet to the front center
of opening where drain connection will be made.
A. Drain hose
All manuals and user guides at all-guides.com
A
B
C
C. Disposer inlet
D. Drain trap
A
Option 4: No Waste Disposer - no air gap
1. Cut end of drain hose if needed (do not cut ribbed section).
A
A. Drain hose (cut here if needed)
2. Attach drain hose to waste tee with 1¹⁄₂" to 2" (3.8 to 5 cm)
screw-type clamp**.
This connection must be before the drain trap and at least 20"
(50.8 cm) above the floor where dishwasher will be installed. It
is recommended that the drain hose be looped up and
securely fastened to the underside of the counter.
A
B
A. Waste tee
B. Drain trap
C. Screw-type clamp
3. Insert drain hose through hole cut in cabinet to the front center
of opening where drain connection will be made.
A. Drain hose
**Parts available from local plumbing supply stores.
E
C
D
D. Drain hose
E. Drain hose (cut
here if needed)
A
7
Publicité
Table des Matières
