Tools Required - R&G IF0001SI Instructions

Please note that the way the kit is packed does not necessarily represent the way of mounting to the
Please note that in cases where kits are packed with rubber washers holding the components onto the bolt –
Page | 2
LEGEND
ITEM 1 = SMW0011 INSTRUMENT PANEL FASCIA (x1).
ITEM 2 = M0308 MOUNTING BLOCK / SPACER (x1).
ITEM 3 = M5 x 35mm LONG BUTTON HEAD BOLT (x4).
ITEM 4 = M6 x 45mm LONG BUTTON HEAD BOLT (x2).
ITEM 5 = S0478 SPACER (x2).
ITEM 6 = M6 WASHER (x2).
ITEM 7 = M6 NYLOC NUT (x2).
Tel: +44 (0)1420 89007 Fax: +44 (0)1420 87301
the rubber washers should be thrown away!

TOOLS REQUIRED


Socket set to include 8 & 10mm sockets and wrench.

Set of metric Allen keys to include 2.5, 3, 4, & 5mm A/F.


Small electrical Phillips screwdriver.
PICTURE 1
Unit 1, Shelley's Lane, East Worldham, Alton, Hampshire, GU34 3AQ
bike.
Phillips screwdriver.
R&G Racing
www.rg-racing.com Email:
PICTURE 2
info@rg-racing.com