Télécharger
Partager
Imprimer la page
  1. Manuels
  2. Marques
  3. R&G Manuels
  4. Accessoires de moto
  5. IA0017
  6. Instructions de montage

R&G IA0017 Instructions De Montage

Masquer les pouces

Publicité

Les langues disponibles

Les langues disponibles

Liens rapides

Télécharger ce manuel
Page 1 of 15
IA0017
FITTING INSTRUCTIONS FOR IA0017 INDICATOR ADAPTORS
FOR KAWASAKI Z900 2020-FRONT OR REAR
PICTURE A
PICTURE B
THIS KIT CONTAINS THE ITEMS PICTURED AND LABELLED OVER PAGE.
DO NOT PROCEED UNTIL YOU ARE SURE ALL PARTS ARE PRESENT.
PLEASE READ ALL INSTRUCTIONS BEFORE PRECEEDING.
IF IN ANY DOUBT WHEN FITTING OUR PRODUCTS, CONSULT ONE OF OUR DEALERS
OR HAVE FITTED BY A QUALIFIED TECHNICIAN.
P
LEASE NOTE THAT THE WAY THE KIT IS PACKED DOES NOT NECESSARILY REPRESENT THE WAY OF
.
MOUNTING TO THE BIKE
T
(
).
HE PARTS SHOWN MAY BE REPRESENTATIVE ONLY
FOR CLARITY OF INSTRUCTIONS ONLY
I
,
N THE EVENT OF RUBBER WASHERS BEING USED TO HOLD COMPONENTS ONTO BOLTS
.
THESE RUBBER WASHERS CAN BE THROWN AWAY
Digital copies of these instructions are available to download from
www.rg-racing.com
R&G Racing
Unit 1, Shelley's Lane, East Worldham, Alton, Hampshire, GU34 3AQ
Tel: +44 (0)1420 89007 Fax: +44 (0)1420 87301
www.rg-racing.com
Email:
info@rg-racing.com

Publicité

loading

Manuels Connexes pour R&G IA0017

Sommaire des Matières pour R&G IA0017

  • Page 1 Page 1 of 15 IA0017 FITTING INSTRUCTIONS FOR IA0017 INDICATOR ADAPTORS FOR KAWASAKI Z900 2020-FRONT OR REAR PICTURE A PICTURE B THIS KIT CONTAINS THE ITEMS PICTURED AND LABELLED OVER PAGE. DO NOT PROCEED UNTIL YOU ARE SURE ALL PARTS ARE PRESENT.
  • Page 2 Page 2 of 15 IA0017 TOOLS REQUIRED MAXIMUM TORQUE SETTINGS • • M4 BOLT = 8Nm Set of metric Allen keys to include 4 & 5mm A/F size. • M5 BOLT = 12Nm • • M6 BOLT = 15Nm 10 and 13mm spanners.
  • Page 3 Page 3 of 15 IA0017 Picture 1 Picture 2 Picture 3 Picture 4 Picture 5 Picture 6 R&G Racing Unit 1, Shelley’s Lane, East Worldham, Alton, Hampshire, GU34 3AQ Tel: +44 (0)1420 89007 Fax: +44 (0)1420 87301 www.rg-racing.com Email: info@rg-racing.com...
  • Page 4 Page 4 of 15 IA0017 Picture 7 Picture 8 Picture 9 Picture 10 Picture 11 Picture 12 R&G Racing Unit 1, Shelley’s Lane, East Worldham, Alton, Hampshire, GU34 3AQ Tel: +44 (0)1420 89007 Fax: +44 (0)1420 87301 www.rg-racing.com Email: info@rg-racing.com...
  • Page 5 Page 5 of 15 IA0017 FITTING INSTRUCTIONS FRONT • Remove the four bolts arrowed in picture 1 and remove the screen. • Remove the two bolts arrowed in picture 2. • Remove the two bolts arrowed in pictures 3 and 4.
  • Page 6 Page 6 of 15 IA0017 Picture 1A Picture 2A Picture 3A Picture 4A Picture 5A Picture 6A R&G Racing Unit 1, Shelley’s Lane, East Worldham, Alton, Hampshire, GU34 3AQ Tel: +44 (0)1420 89007 Fax: +44 (0)1420 87301 www.rg-racing.com Email: info@rg-racing.com...
  • Page 7 Page 7 of 15 IA0017 Picture 7A Picture 8A Picture 9A Picture 10A Picture 11A Picture 12A R&G Racing Unit 1, Shelley’s Lane, East Worldham, Alton, Hampshire, GU34 3AQ Tel: +44 (0)1420 89007 Fax: +44 (0)1420 87301 www.rg-racing.com Email: info@rg-racing.com...
  • Page 8 Page 8 of 15 IA0017 Picture 13A Picture 14A Picture 15A Picture 16A Picture 17A Picture 18A R&G Racing Unit 1, Shelley’s Lane, East Worldham, Alton, Hampshire, GU34 3AQ Tel: +44 (0)1420 89007 Fax: +44 (0)1420 87301 www.rg-racing.com Email: info@rg-racing.com...
  • Page 9 Page 9 of 15 IA0017 FITTING INSTRUCTIONS REAR • To fit the R&G tail tidy, first remove the pillion seat using the key. • Slide the rider’s seat catch as shown in picture 2A and remove the rider seat. •...
  • Page 10 Page 10 of 15 IA0017 • Repeat the above for the opposite indicator. • Reassemble the licence plate bracket as original. • Refit the licence plate bracket as original. • Reconnect the indicators to the original wiring plug socket using the supplied connector (item 3) (it is a good idea to test the indicator at this stage if illumination fails, swap the bullet connections around).
  • Page 11 Page 11 of 15 IA0017 NOTICE DE MONTAGE POUR IA0017 ADAPTATEURS CLIGNOTANTS POUR KAWASAKI Z900 2020- AVANT OU ARRIÈRE PHOTO A PHOTO B E KIT CONTIENT LES ARTICLES ILLUSTRES ET ETIQUETES SUR LA PAGE ERTAINES PARTIES PEUVENT ETRE PRESENTES UNIQUEMENT POUR LA CLARTE DES INSTRUCTIONS...
  • Page 12 Page 12 of 15 IA0017 OUTILS REQUIS ALEURS DE SERRAGE MAXIMALES • Clés Allen 4 & 5mm. M4 BOULON = 8Nm M5 BOULON = 12Nm • Clés à molette 10 et 13mm. M6 BOULON = 15Nm M8 BOULON = 20Nm •...
  • Page 13 Page 13 of 15 IA0017 NOTICE DE MONTAGE : AVANT • Retirez les quatre boulons fléchés sur la photo 1 et retirez l'écran. • Retirez les deux boulons fléchés sur la photo 2. • Retirez les deux boulons fléchés sur les photos 3 et 4.
  • Page 14 Page 14 of 15 IA0017 NOTICE DE MONTAGE : ARRIÈRE • Pour installer le support R&G, retirez d'abord le siège passager à l'aide de la clé. • Faites glisser le loquet du siège du pilote comme indiqué sur la photo 2A et retirez le siège du pilote.
  • Page 15 Page 15 of 15 IA0017 • Répétez ce qui précède pour le clignotant opposé. • Remontez le support de plaque d'immatriculation comme à l’origine. • Remontez le support de plaque d'immatriculation comme à l'origine. • Rebranchez les clignotants sur la prise d'origine à l'aide du connecteur fourni (article 3) (il est judicieux de tester le clignotant.