Publicité
Les langues disponibles
Les langues disponibles
CP0371
LEGEND
ITEM 1 = CRASH PROTECTOR (B0063 with CS409) (x2).
ITEM 2 = SPACER (S0809) (34mm long) (x1).
ITEM 3 = SPACER (S0810) (36mm long) (x1).
ITEM 4 = M12x1.25x85mm LONG HEX HEAD BOLT (x1).
ITEM 5 = CRASH PROTECTOR CAPS (BC0002) (x2).
ITEM 6 = M12 WASHERS (x2).
ITEM 7 = LOCK-WASHERS (LW0001) (x2).
ITEM 8 = M12x1.25x80mm LONG HEX HEAD BOLT (x1).
ITEM 9 = M12 MARKING TOOL (T0010) (x1).
Please note that in cases where kits are packed with rubber washers holding the components
onto the bolt – the rubber washers should be thrown away!
TOOLS REQUIRED
Socket set to include 14 & 19mm socket and wrench.
Drill
28mm Hole Saw and/or Dremel type tool.
Torque wrench (up to 40N/m).
TOWARDS REAR
TOWARDS FRONT
OF BIKE
OF BIKE
PICTURE C
Picture 1
Picture 2
R&G Racing
Unit 1, Shelley's Lane, East Worldham, Alton, Hampshire, GU34 3AQ
Tel: +44 (0)1420 89007 Fax: +44 (0)1420 87301
www.rg-racing.com
Email:
info@rg-racing.com
Publicité
