4 4
Remove base.
6 6
Fasten a wooded 1" x 3" along the rear and sides of framing
(immediately below marks).
Installation Instructions
8 8
Assure waste pipe protrudes well into drain fitting. (pan install only)
Customer Service: 1-877-GET-MAAX (1-877-438-6229).
— 3 —
Installation steps
5 5
Measure the distance between the top of the back horizontal flange and the bottom of
the pan ledge, at approximately 1-1/2". Mark this dimension on the back studs,
below the first mark of step 3.
7 7
Install drain assembly per manufacturer's instructions.
Place base into framing pocket.
9 9
Tap down until level. Level horizontally and vertically using a level. Use shims if
necessary. The apron should be resting firmly on the ground.
6030 BATHTUB, 6030 PAN