Publicité
Liens rapides
INSTALLATION INSTRUCTIONS
GUIDE D'INSTALLATION
103901 • 103903 • 105516 • 105797 • 105798 • 106150 • 106151 • 106192 • 106193 • 106426
106619 • 106839 • 106840 • 106841 • 106842 • 106843 • 106902 • 106903 • 106942 • 106992
106993 • 106994 • 106995 • 106996 • 106997 • 107519 • 107520
Read all instructions carefully before proceeding.
Lire toutes les instructions attentivement avant de commencer l'installation.
IMPORTANT
• Record the serial number
IMPORTANT
• Noter le numéro de série
1
2
FREESTANDING BATHTUB
BAIGNOIRE AUTOPORTANTE
MODEL • MODÈLE
SAVE THIS GUIDE FOR FUTURE REFERENCE.
CONSERVER POUR UN USAGE ULTÉRIEUR.
View F² Drain Video - Scan QR
code with a mobile device
Voir Vidéo de F² Drain - Balayer QR
code avec un dispositif mobile
Ver video de F² Drain - Escanear
código QR con un dispositivo mobil
1. F² Drain video (english)
2. Vidéo pour F² Drain (français)
A two person installation
is recommended.
Une installation par deux
personnes est recommandé.
Serial number • Numéro de série
Publicité
Manuels Connexes pour MAAX 106619
Sommaire des Matières pour MAAX 106619
- Page 1 103901 • 103903 • 105516 • 105797 • 105798 • 106150 • 106151 • 106192 • 106193 • 106426 106619 • 106839 • 106840 • 106841 • 106842 • 106843 • 106902 • 106903 • 106942 • 106992 106993 • 106994 • 106995 • 106996 • 106997 • 107519 • 107520 A two person installation is recommended.
- Page 2 Table of contents: Page Before you begin......................... 3 Tools and supplies.......................4 1. Unpacking the unit......................5 2. Leveling legs adjustment....................6 3. Bathtub skirt and drain positioning.................. 7 4. Faucets installation (not included)...................8 5. Bathtub preparation and installation................9 Troubleshooting and maintenance..................14 Warranty..........................15 Indice: Page Avant de débuter.........................
- Page 3 Should inspection reveal any damage or defect in the finish, contact your distributor. The warranty does not cover damages or defects in the finish once the unit has been installed. MAAX’s responsibility for shipping damages ceases upon delivery of the product in good order to the carrier. All complaints regarding damage due to transport must be made directly to the carrier.
- Page 4 TOOLS OUTILS REQUIRED REQUIS ⅛" -drill bit Mèche de ⅛ po. Level Pencil Electric drill Niveau Crayon Perceuse électrique Safety equipment Screwdriver 30" 2 x 4 studs Équipement de sécurité Tournevis montant 2 x 4 de 30 po Utility knife Couteau à...
- Page 5 Follow all instructions and check them off as you go. Suivre toutes les instructions et les cocher lorsqu'elles sont terminées. Do not remove the Technical Identification number, doing so may void the warranty. This number may be found at the back of the tub or above the drain, It is recommended to take note of the number so that it is easier to access.
- Page 6 Leveling legs adjustment STEP Ajustement des pattes ajustables ÉTAPE ⅛" Check me! Place back the skirt in the inverted bathtub. Adjust the Cochez-moi! legs so that they exceed the top of the edge of the skirt by 1/8". You can use a 2x4 to take the measure as shown.
- Page 7 Bathtub skirt and drain positioning STEP Positionnement de la jupe de la baignoire et du drain ÉTAPE Check me! With the help of the bathtub apron or the optional Cochez-moi! template, mark the center of the drainage line in relation with the desired position of the bathtub.
- Page 8 Installing faucets (NOT INCLUDED) STEP Installation de la robinetterie (NON INCLUSE) ÉTAPE Check me! Cochez-moi! Faucet elements must be installed in the intended area. See also the rough-in information for your model on our website. Before drilling, position the faucet base to make sure they line up with the predrilled holes.
- Page 9 Bathtub preparation and installation STEP Preparation et installation de la baignoire ÉTAPE Install the waste and overflow and faucets according to Check me! the manufacturer's instruction manuals. Cochez-moi! Installer le trop plein et les robinets en suivant le guide d'installation du manufacturier. If customer has a F2 drain, it will require a piece of PVC pipe of 1 1/2'' diameter x about 1'' long between the pre-installed drain tee on tub and the F2 drain pipe.
- Page 10 Bathtub preparation and installation (cont'd) STEP Preparation et installation de la baignoire (suite) ÉTAPE For model Serenade (105516) ONLY: Pour le modèle Serenade (105516) SEULEMENT: We recommend using a flexible drainpipe #10025755-XXX for an optimum installation. Consult local plumbing and building codes to assure this waste and overflow meets your local regulations.
- Page 11 Bathtub preparation and installation (cont'd) STEP Preparation et installation de la baignoire (suite) ÉTAPE For model Serenade F (105516) EQUIPPED WITH A BLOWER ONLY: Pour le modèle Serenade F (105516) ÉQUIPÉ AVEC UN SOUFFLEUR SEULEMENT: Using the bathtub apron, trace the required lines and make the required openings in the floor, without exceeding the apron; •AEROSENS system bathtub: make an opening in the floor to receive drain pipe and supply tubing.
- Page 12 Bathtub preparation and installation (cont'd) STEP Preparation et installation de la baignoire (suite) ÉTAPE Top view / Vue de dessus Check me! Apply a silicone seal under the apron (optional). According to bathroom flooring, use proper screws (not Cochez-moi! included) to secure the skirt to the floor. Appliquer un joint de silicone sous la jupe (facultatif).
- Page 13 Bathtub preparation and installation (cont'd) STEP Preparation et installation de la baignoire (suite) ÉTAPE Remove the spacers. Make sure all the legs are in Check me! contact with the ground, so that the bathtub is not Cochez-moi! supported by the skirt (see cut view below). The bathtub must be tested before installation is complete.
- Page 14 THIS STEP IS FOR THE SOUVENIR BATHTUB 106619 ONLY CETTE ÉTAPE EST POUR LA BAIGNOIRE SOUVENIR 106619 SEULEMENT Bathtub preparation and installation (cont'd) STEP Preparation et installation de la baignoire (suite) ÉTAPE Fasten bathtub to apron with 10 round head screws #8 X...
- Page 18 TOUBLESHOOTING Water accumulates around the drain and the bathtub does not completely empty. • Check that the installation is leveled and that the bathtub is well supported by the legs. With the help of level, place at the bottom of the bathtub, make sure to have a slight slope towards the drain. If necessary, adjust the legs under the bathtub.
- Page 19 LIMITED WARRANTY — UNITED STATES MAAX Bath Inc. offers express limited warranty on each of its products. This warranty extends only to the original owner/end-user for personal household use. For commercial uses, additional limitations apply. For accessing product Limited warranty please visit: www.maax.com/us-warranty...
- Page 20 Technical Services / Service technique / Servicio técnico T. 1 877 GET-MAAX (1 877 438-6229) F. 1 888 361-2045 10025754 © 2023 MAAX Bath Inc. PRINTED IN CANADA / IMPRIMÉ AU CANADA / IMPRESO EN CANADA 2023-03-16...