Sonnenkonig AIR FRESH 7 Mode D'emploi page 52

8 Functional description
Press this button to turn on the unit at low speed, and display the room tempe-
rature.
ON/OFF
Press it again to turn off the unit.
EN Press this button to switch the unit from LOW to MID to HI Speed, in Normal
Mode.
SPEED
Press this button to turn to the max wind air.
Press it again to turn to original wind setting.
JET WIND
Press this button to start Fan Oscillation in left and right direction.
OSC
Press it again to stop Oscillation.
Press this button to start Fan Oscillation in up and down direction.
OSC
Press it again to stop Oscillation.
Before activating this function, ensure there is enough water in the lower water
tank.
COOLER
Press this button and the water pump starts running. The water circulates
from the cooler master to allow warm air to be converted to cool air (warm air
combined with water vapor) and to cool down the temperature effectively. If you
have used the cooler function, when you stop the product, the fan will continue
working for 5 minutes to dry the cooler master. If you press the "Off" button
twice, the product will be forced to stop.
** For better cooling effect, we recommend adding an ice box or ice in the upper
water tank.
Caution: the unit has a water shortage warning system. If there is not
enough water, the COOLER function will be automatically stopped, and
3 beep warning sound will be heard, and the cooler display will flash.
When the unit is in use, you can set the Timer to turn off the fan after a speci-
fied time. Press this button repeatedly to increase the Timer setting in 1 hour
TIMER
increments (up to a maximum of 9 hours) as indicated on the display. After 5
seconds, the Timer starts. Once the Timer has run out, the unit will turn off.
Press this button to turn the Ionizer feature on/off (the fan must be operating
ION
for the Ionizing function to work).
When the Ionizer is turned on, it will assist in the purification of the air in the
room.
52