If You No Longer Need Software Or Driver (Uninstall); Notes - Panasonic PV-GS250 Mode D'emploi

If the above operation is not performed correctly,
when data is copied from the personal computer
to an SD Memory Card, the copied data may be
damaged.
When the following operations are performed, the
same results will occur as when the USB cable is
incorrectly removed (above). Therefore, it is
imperative that the above operation is completed
before proceeding.
≥When SD Memory Card is removed.
≥When Camcorder power is turned OFF.
≥When Mode Dial is turned to change modes.
If you no longer need software or
driver (Uninstall)
The screens may vary with the type of OS.
1
Select [Start] (>> [Settings]) >>
[Control Panel], select the software or the
driver from [Add/Remove Programs] to
uninstall.
≥Uninstalling steps may vary depending on the
OS. Please refer to the user manual of your OS.

Notes

®
≥Microsoft
, Windows
®
and DirectX are either registered trademarks
or trademarks of the Microsoft Corporation in
the United States and/or other countries.
® ®
≥Intel
, Pentium and Celeron
registered trademarks or trademarks of the Intel
Corporation.
≥All other names, company names, product names,
etc. in these instructions are the trademarks or
registered trademarks of their respective corporations.
≥The names of the products you are using may
differ from the names given in the text.
Depending on the operating environment and
other factors, the contents of the screens used
in these instructions may not necessarily match
what you will see on your screen.
≥Although the screens in these Operating
Instructions are shown in English for the sake of
example, other languages are supported as
well.
60
LSQT0862
®
, Windows Messenger
®
are the
With a PC
≥These instructions do not cover the basic
operations of the personal computer or define
any terms. For this information, refer to the
Operating Instructions which accompany your
personal computer.
≥Do not disconnect USB connection cable while
the operation light of Camcorder is on. It may
freeze the software or destroy the data in
transfer.
≥We recommend using the AC adaptor as the
power source for the Camcorder when
connecting to the personal computer. Data may
be lost If the battery power is lost while
transferring data.
≥If the Camcorder is used as a Web Camera
while virus checking software is running, the
Camcorder's operation may stop midway
through. In this case, exit the Windows
Messenger, reconnect the Camcorder and
restart the Windows Messenger.
≥Do not delete the folders in Memory Card such
as picture folder. Memory card may not be
recognized if folders are deleted.
≥When the Camcorder is switched to the PC
Mode while it is connected to the personal
computer, the operation mode of the Camcorder
cannot be switched. In this case, disconnect the
USB connection cable. Switch the operation
mode of the Camcorder and reconnect the
cable.
≥If the Camcorder is connected in the PC Mode,
the [Removable Disk] icon representing the
Memory Card drive is displayed in
[My Computer].
≥When the Tape Recording Mode of the
Camcorder is switched to the PC Mode, a
®
warning message may be displayed. You may
simply ignore it.
≥When you are using Windows XP or Windows
2000, you may install or uninstall this software
after logging ON by setting the user name to
Administrator or to a user name having
equivalent authority.
≥If you use Windows 98SE, the message, "File is
not found" may be displayed when the
Camcorder is connected for the first time. Enter
the following paths to complete the connection:
If the message "MTDV98M3.pdr is not found" is
displayed, enter
"C:\WINDOWS\system\IOSUBSYS". If the
message "MTDV98M3.sys is not found" is
displayed, enter
"C:\WINDOWS\system32\DRIVERS".
(The paths will differ depending on the
environment of your personal computer.)