Serial Output Examples And Form Command; Technical Support - Vaisala DPT145 Guide Rapide

QUICK GUIDE ____________________________________________________________________

Serial Output Examples and FORM Command

Technical Support

14 __________________________________________________________________ M211369EN-B
Command to set default output format:
form /
Output example (continuous output from RUN mode):
Tdf= 8.1 'C Tdfatm=
Pnorm= 0.992 bara Rhoo=
Tdf= 8.1 'C Tdfatm=
Pnorm= 0.992 bara Rhoo=
...
Command to set output format as Tdf and P with Modulus-256
checksum:
form 3.1 "Tdf=" Tdf U3 3.3 "P=" P " " U4 " " CS2 \r \n
Output example (continuous output from RUN mode):
Tdf= 12.5'C P=
Tdf= 12.5'C P=
...
The complete DPT145 User's Guide is available in English at
www.vaisala.com/DPT145.
For technical questions, contact the Vaisala technical support by e-mail at
helpdesk@vaisala.com. Provide at least the following supporting
information:
- Name and model of the product in question.
- Serial number of the product.
- Name and location of the installation site.
- Name and contact information of a technically competent person who
can provide further information on the problem.
8.2 'C H2O= 10870 ppm P=
6.0 kg/m3 T= 22.8 'C
8.2 'C H2O= 10878 ppm P=
6.0 kg/m3 T= 22.8 'C
0.949 bara 72
0.950 bara 6A
1.002 bara
1.002 bara