Installation Without Weather Shield - Vaisala DPT145 Guide Rapide

QUICK GUIDE ____________________________________________________________________

Installation Without Weather Shield

8 ___________________________________________________________________ M211369EN-B
1. Remove the yellow transport protection plug when
you are ready to install the transmitter.
2. Install the transmitter to the mechanical coupling
and tighten by hand.
3. Use a wrench to tighten the connection. Turn from
the adapter, not from the transmitter body!
Use sufficient force to achieve a tight installation.
The system must be leak-free for accurate
measurement.
4. For standard wiring, connect the cable to port II on
the transmitter.
Use a cable with a suitable connector for your
installation (straight or angled).
Let some of the cable hang from the back of the
transmitter, so that condensation cannot run along
the cable to the transmitter.