Vaisala DPT145 Guide Rapide page 13

___________________________________________________________________________ English
VAISALA _______________________________________________________________________ 11
6. For standard wiring, connect the cable to port
II on the transmitter. Route the cable to the
cable clamp on the underside of the weather
shield. Attach the cable using a crosshead
screwdriver.
Let some of the cable hang from the back of
the transmitter, so that condensation cannot
run along the cable to the transmitter.
For cables with a straight connector:
move the rubber plug to the bottom hole and
route the cable from the back of the weather
shield.
7. Replace the weather shield cover using an
8 mm box-end wrench.