Installation With Weather Shield - Vaisala DPT145 Guide Rapide

___________________________________________________________________________ English

Installation With Weather Shield

VAISALA ________________________________________________________________________ 9
1. When DPT145 is ordered with the weather
shield, the transmitter is delivered already
attached to the shield.
If you have ordered the weather shield
separately, attach the transmitter to the
weather shield before continuing this
procedure. Fit the clamp of the weather shield
over the adapter, not the transmitter body.
For ABB Malmkvist and Alstom G1/2" type
adapters, place the clamp over the notches in
the adapter.
2. Use an 8 mm box-end wrench to loosen the
four bolts that hold the weather shield cover.
Remove the cover.
It is not necessary to remove the bolts, they
can remain in place during installation.
3. Remove the yellow transport protection plug.
Make sure the surfaces are clean and dry.