Vaisala DPT145 Guide Rapide page 12

QUICK GUIDE ____________________________________________________________________
10 __________________________________________________________________ M211369EN-B
4. Install the transmitter to the mechanical
coupling and tighten by hand. Try to keep the
weather shield level.
5. Use a wrench to tighten the connection. Turn
from the adapter, not from the transmitter
body!
Use sufficient force to achieve a tight
installation. The system must be leak-free for
accurate measurement.
If the weather shield is tilted after the
installation, you can straighten it by loosening
the two nuts that keep the clamp tight.
Tighten the nuts after weather shield is
straight.
Note: The cable with the angled connector
has a fixed direction, and is designed to be
routed straight down from port II. If you
rotate the transmitter inside the weather
shield, or if you have the Alstom G1/2" type
adapter, you may have to use a cable with a
straight connector.