Valor 2200SFK Guide D'installation Et D'operation page 6

5. Place the assembled middle section above the
appliance. Use shims to provide a gap between the
framing kit and the appliance to ensure weight of
wall is not transferred to the appliance top.
a) Fix the framing kit to the wall using 3-1/4"
screws through the nested 2 x 4 into a
minimum of 3 wall studs behind the appliance
using 2 screws per stud.
2" x 4" x 52" long
6. To provide additional backing for television brackets
etc., wood backing/framing can be nested within
steel studs provided combustible material is kept
above the appliance stand-off height.
6
b) Use additional screws through lower sheet
metal frame into studs to secure bottom of
section.
c) Remove shims.
Use temporary shims
before fastening to wall
to provide gap.
Nest wood backing within steel
channels if necessary for improved
fastener grip when mounting
TV bracket
Gap
No combustible
framing/wiring, etc.
below stand-off
height.
/ 4 "
- 1
1 1