Serving/clearing trolley
OPerating inStrUctiOnS
cleaning methods
Use approved cleaning methods only.
Do not use steam jet units, high-pressure cleaners, water sprayers or similar cleaning devices.
general information on cleaning agents
Do not use metal parts for cleaning. Metal parts can damage the trolley and/or cause corrosion.
Do not use pointed or sharp objects for cleaning. They can damage the trolley.
Do not use scouring agents. Scouring agents scratch surfaces.
cleaning agents for synthetic parts
Do not use scouring agents. Scouring agents scratch surfaces.
Do not use the following cleaning agents or cleaning agents containing the following substances
(material damage!):
• Ethyl alcohol, isopropyl alcohol and higher alcohols
• Acetone
• Benzene
• Turpentine
• Acetic ester
castor brakes
Maintenance
Check that castor brakes work effectively on a regular basis.
If brakes do not lock effectively, have the defective castor(s) replaced immediately by one of the
-en-
service points listed under Repairs.
authorised persons
repairs
The trolley may only be repaired by the following service points:
• In-house, BLANCO Professional-trained professionals
• External, BLANCO Professional-trained customer service
• BLANCO Professional service
The warranty will be invalidated if the trolley is repaired by anyone else.
Observe the applicable standards, guidelines and safety regulations.
Standards and guidelines
The owner is responsible for compliance with the applicable standards, guidelines and safety
regulations.
Product marking
The trolley has been provided with a rating plate. The warranty is voided if the rating plate is re-
moved.
13