EN
5. ERROR REPORTING AND THEIR RESOLUTION
Error Reporting
A possible fault is indicated by simultaneously flashing icons
The status of the temperature keys determines the error code
The presence of the error allows the user to enable both the White Lamp and Chromotherapy (obviously if the error is
not such as to affect these capabilities).
5.1 MAXIMUM PRIORITY ERRORS
All the following errors belong to this type:
- Errors that do not allow for starting a new hammam
- Errors that interrupt an active hammam in a mono-generator system
- Errors that interrupt an active hammam in a multi-generator system
- Errors that require disconnecting the system power to reset the error.
5.2 HIGH PRIORITY ERRORS
All the following errors belong to this type:
- Errors that do not allow for starting a new hammam
- Errors that interrupt an active hammam in a mono-generator system
- Errors that interrupt an active hammam in a multi-generator system
Example:
Lack of communication of the internal cards or incorrect database (in case of loss of communication of a card) check
the connection of the various devices. If the problem persists contact your service centre.
5.3 AVERAGE PRIORITY ERRORS
All the following errors belong to this type:
- Errors that do not allow for starting a new hammam
- Errors that interrupt an active hammam in a mono-generator system
- Errors that interrupt an active hammam in a multi-generator system only if they relate to all the generators in the
system
NUVOLA SMART POWER 110-140-180
All manuals and user guides at all-guides.com
62
.