Hammam/Turkish Bath Trouble-Shooting; Critical Errors - effegibi Logica Manuel D'utilisation Et D'entretien

EN
12.

HAMMAM/TURKISH BATH TROUBLE-SHOOTING

(only for the products Logica Twin, S+H Twin, Logica Hammam, H-One)
TROUBLE-SHOOTING
Any faults are signalled by the simultaneous flashing of the icons
When the system detects a CRITICAL error it is impossible to perform normal operations from the control
panel. The Hammam and colour-therapy sequences cannot be run. Only the White Light will operate, if this
is fitted, unless of course the problem also affects this function. The control panel is only able to operate in
"STAND-BY" and" PANEL ON" modes.
12.1

CRITICAL ERRORS

Critical errors make it impossible to switch on any of the functions.
These are also indicated when the "ERROR/MAINTENANCE" icon comes on.
Example:
Lack of communication with the internal circuit boards or incorrect database, when a circuit board has been
replaced and the start-up sequence has not been run. In this situation repeat the start-up sequence (see
chapter 4.1). If the problem persists, disconnect from the power supply, turn off the water tap upstream of the
unit and call your approved assistance centre or the company direct.
70
The data and features referred to are not binding on EFFEGIBI and the company reserves the right to make any appropriate changes without having to give prior warning or
LOGICA OPERATING AND MAINTENANCE MANUAL
Please note: error messages for the Hammam/Turkish bath area are signalled on the
steam generator control panel inside the Hammam cubicle.
replace this manual.
.