Cleaning, Care & Maintenance; Technical Specifications - Polar Refrigeration DM071 Mode D'emploi

Cleaning, Care & Maintenance
• Always switch off and disconnect the power supply before cleaning.
• Warm, soapy water is recommended for cleaning. Cleaning agents may leave harmful residues.
• A POLAR agent or qualified technician should carry out repairs if required.
• Periodically clean the bottom of the cooler compartment to remove any build-up of condensation.
Troubleshooting
If your POLAR appliance develops a fault, please check the following table before making a call to the
Helpline or your POLAR dealer.
Fault
The appliance is not
working
Appliance is noisy or
works intermittently
Cooler cabinet is not
cold enough
Doors will not close
properly

Technical Specifications

Model Voltage
DM071
220-240V
50Hz
DM071_ML_A5_v3_20190619.indb 5
Probable Cause
The unit is not switched on
Plug and lead are damaged
Fuse in the plug has blown
Power supply
Internal wiring fault
Appliance is not level
Temperature set incorrectly
External environment may require
colder temperature
The door is opened too often
Door seal is worn
Cooler is not level
Door has been reversed and not
properly fitted
Shelves are out of position
Door seal is dirty
Power Current Refrigerant
85W 0.55A R600a
Solution
Check the unit is plugged in correctly and
switched on
Call POLAR agent or qualified Technician
Replace the fuse
Check power supply
Call POLAR agent or qualified Technician
Adjust the feet to level the appliance
Check temperature and reset if necessary
Check temperature and reset if necessary
Only open when necessary
Call POLAR agent or qualified technician
Adjust the feet
See "Reversing the Door"
Check all shelves are properly inserted
Wipe clean with a damp cloth
Temp. Dimensions
Range H x W x D mm
0-18°C 510 x 430 x 480
UK
Weight
(kg)
15
5
2019/6/19 15:01