Cleaning, Care & Maintenance; Replacing The Interior Lamp; Cleaning The Condenser - Polar Refrigeration CD984 Mode D'emploi

UK
Cleaning, Care & Maintenance
• Switch off and disconnect from the power supply before cleaning.
• Clean the interior of the appliance as often as possible.
• Do not use abrasive cleaning agents. These can leave harmful residues.
• Clean the door seal with water only.
• Always wipe dry after cleaning.
• Do not allow water used in cleaning to run through the drain hole into the evaporation pan.
• A POLAR agent or qualified technician must carry out repairs if required.

Replacing the Interior Lamp

WARNING: Allow the lamp to cool before replacing. The lamp remains hot immediately
after use.
Turn Off and disconnect the appliance from the mains power supply.
1.
Unscrew the plastic lamp cover.
2.
Remove the lamp by twisting it from the lamp sockets.
3.
Insert the new lamp and replace the cover.
4.

Cleaning the Condenser

Periodically cleaning the condenser can extend the life of the appliance.
POLAR recommend that a POLAR agent or qualified technician clean the condenser.
4