Telephone Helpline: 0845 146 2887 (United Kingdom)
Cleaning, Care & Maintenance
•
Switch off and disconnect from the power supply before cleaning.
•
The doors can be removed for ease of cleaning.
•
Clean the interior of the appliance as often as possible.
•
Do not use abrasive cleaning agents. These can leave harmful residues.
•
Clean the door seal with water only.
•
Always wipe dry after cleaning.
•
Do not allow water used in cleaning to run through the drain hole into the evaporation pan.
•
A POLAR agent or qualified technician must carry out repairs if required.
Replacing the Interior Lamp
WARNING: Allow the lamp to cool before replacing. The lamp remains hot immediately
after use.
Turn Off and disconnect the appliance from the mains power supply.
1.
Remove the lamp by twisting it from the lamp sockets.
2.
Insert the new lamp and twist into place.
3.
Cleaning the Condenser
Periodically cleaning the condenser can extend the life of the appliance.
POLAR recommend that a POLAR agent or qualified technician clean the condenser.
UK
4