electrical data
direction of rotation
rotation time for 100 %
electrical connection
position feedback
resistance change
of potentiometer
max. slider current
of potentiometer
max. power in
potentiometer
rated operating
voltage
8)
Voltage tolerance
power consumption
note
pause time with change of rotation 0.4 s.
1 )
increased wear with continuous operation of the motor.
2 )
limited gas seal
3 )
impurities (e.g., fluff etc.) should be pre-filtered, otherwise the function of the valve could be impaired.
4 )
at 24 V dc smoothed. pulsed drive increases the rotation time (see also
5 )
6 )
higher currents considerably reduce the service life!
higher temperatures limit the max. power loss of the potentiometers.
7 )
min. pulse duration (the pulse duration increases for no-load / under load/pressure): approx. 100 ms
8 )
depending on polarity
approx. 7 s at 24 V dc, depending on load
5)
round plug according to din 43651
(6-pole and earth)
potentiometer 1 kΩ linear
(optional 5 kΩ linear
plastic design)
protective resistance rs = 6.8 kΩ
approx. 55 ... 75 % (at 100 % rotation path)
standard design: ≤ 4 ma
conduction plastic design: ≤ 65 µa
0.5 W / 40 °c
7)
24 V dc
±10 %
3 W
Max. number of operations = 400,000 under laboratory conditions,
20 °c and 1 s operation time for each through the complete rotation
range.
and conducting
6)
)
8)
0250 - 15