Flexible Seat - Vermeiren Eclips X4 Mode D'emploi

All manuals and user guides at all-guides.com
Some of the wheelchairs are made with an adjustable axle adjuster. With these adjuster you
can also change the seat height.
1
3.4

Flexible seat

L L L L
WARNING:
Risk of injury - Make sure that all screws are properly tightened with
the appropriate tool.
The seat frame is available in different seat depths.
To close the gap between the back frame and the seat, fold the flap of the backrest under
the seat ( Velcro fastening).
Changing the seat cover as follows:
1. Remove the screw at the front end of the seat frame.
2. Pull the locking pin Ⓒ out.
3. Now the seat Ⓐ can be removed by pulling it gently forwards out the sleeve of tube
Ⓑ.
Do the reverse when you want to replace the seat.
1. Remove the screws
2. Push/Pull the adjustable axle adjuster
upwards or downwards to the required
height.
2
3. Retighten the screws
3
Page 19
Eclips X4, Eclips X4 30°
2012-01
and .
and .