Summary Screen; Quick Access Menu - Snooper SYRIUS PRO Guide De L'utilisateur

Masquer les pouces Voir aussi pour SYRIUS PRO:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 163
6.4 Change Start Position
You can use this function if you would like to calculate a route but from a different
location to the one you are currently at. First input your destination address as normal
but when you reach the Summary page, press the 'Route Option' button.
Now press the 'Change Start Position' icon. You are provided with the following search
options:
Find address by City
Find address by post code
Find by POI
Find by recently used
To find out how to use these options please refer to the applicable sections in this user manual.
Once you have found the new starting point, press the 'Set' button.
The 'Change Start Position' is now highlighted with a red box. Now press the 'Done' button followed by the 'Calculate' button.
6.5 Summary Screen
The summary screen provides you with the information of your intended route such as
distance to destination and estimated time of arrival for example and gives you the option
of making any changes or viewing the route prior to commencing your journey.
6.5.1 Simulation
Press the 'Simulation' button and 6 SERIES will take you through the calculated journey
step by step with full on screen and voice instructions.
Please Note: If at any time you wish to cancel the simulation press the return arrow
of the display.
6.5.2 Route Options
The 'Route Option' function can be accessed from this page, this allows you to tailor your journey using options such as 'Shortest
Time' or 'Shortest Distance' Please refer to the 'Route Option' section of this manual for more details.
6.5.3 Guide
If you would like to check the turn by turn instructions of the route calculated prior to departure press the 'Guide' button on the

Summary screen.

7.0 Quick Access Menu
A small on-screen Menu can be launched by touching the screen anywhere along the top 10mm of the display. See diagram on the right.
The quick access menu will drop down automatically. If no other button on the drop down box are pressed the drop down box disappears
after approximately three seconds.
From this Menu you can:
Zoom closer in, or zoom further out from the map.
Mute or alter the audio level
By pressing the
icon you can manipulate the map
Switch between the 2D, 3D and North views.
Switch between day and night settings
Switch off the speed camera location facility.
Return to contents
All manuals and user guides at all-guides.com
66 • EN
located in the bottom right hand corner

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Ventura proTruckmate pro

Table des Matières