Clear Avoided Road; Navigate Via Location - Snooper SYRIUS PRO Guide De L'utilisateur

Once the calculation is complete you can either press 'Go' to start navigation, 'Simulation' to see the actual route that will be
taken, 'Route Option' to change the parameters of the route or 'Guide' which will list the turn by turn instructions of the journey.
The 'Summary Screen' will tell you the distance to your destination, estimated time of arrival and the estimated time it will take to
complete your journey.
Please note: The summary screen is only displayed for approximately 10 seconds before the unit automatically begins to
provide you with turn-by-turn instructions.
6.2.3 Clear Avoided Road
If you do not wish to use the alternative routes offered by 6 SERIES and you wish to return to the original calculated route, press the
'Clear Avoided Road' button and the original route plotted by 6 SERIES will be restored.
Once the re-calculation of the original route is complete the summary screen is displayed. Once the calculation is complete you can
either press 'Go' to start navigation, 'Simulation' to see the actual route that will be taken, 'Route Option' to change the parameters
of the route or 'Guide' which will list the turn by turn instructions of the journey. The 'Summary Screen' will tell you the distance to
your destination, estimated time of arrival and the estimated time it will take to complete your journey.
Please Note: If you have already travelled some of the re-calculated route, 6 SERIES may produce a slightly different route from
what was originally plotted.
The summary screen is only displayed for approximately 10 seconds before the unit automatically begins to provide you with
turn-by-turn instructions.
If the 'Avoid by Road' and 'Avoid by Range' have not been used, this feature is unavailable and the button will be greyed out.
6.3 Navigate Via Location
If you would like to calculate a route to a destination but want to go via a specific
location along the way you can use this function. Simply input the details of your final
destination as usual but press the 'Route Option' button in the summary screen and
then select the 'Navigate Via Location' button. You are provided with the following
search options:
Find address by City
● ●
Find address by post code
● ●
Find by POI
● ●
Find by recently used
● ●
To find out how to use these options please refer to the applicable sections in this user manual.
Once you have found the address or location you would like to go to via your route, press
the 'Set' button. A red tick is now displayed on the 'Navigate Via Location' button.
Now press the 'Done' button followed by the 'Calculate' button.
If you would like to check the route calculated prior to departure press the 'Guide'
button on the Summary screen which will give you a list of each turn by turn instruction
from the start of your journey to the end.
Return to contents
All manuals and user guides at all-guides.com
65 • EN