Snooper SYRIUS PRO Guide De L'utilisateur page 61

5.14 TMC
This feature allows you to configure the type of TMC alerts you receive along with the facility to view the radio tuner that searches for
TMC transmissions when the TMC aerial is plugged into the TMC socket. To access this facility:
Press the centre of the screen to enter the 'Navigate to' menu.
● ●
Press the 'Configure' button.
● ●
Press the black arrow once.
● ●
Press the 'TMC' icon.
● ●
All TMC alerts are switched on by default. The screen will now show a list of TMC alert types with a 'tick' box to the left of each type.
Simply press the tick box to select or
deselect the TMC alert type. A red tick in the box indicates that the TMC alert will appear when you access the TMC alert box that
appears on the map display, an un-ticked box will remove the TMC alert type from the TMC alert box.
To scroll through the list of TMC alerts you can press either the up or down arrows located on the right hand side of the display.
● ●
To deselect all TMC alerts from the TMC alert box un-tick the 'ALL' tick box at the top of the list of TMC alert types.
● ●
If you wish to manually adjust the radio frequency the unit is using to obtain TMC alerts you can select the 'Channel' option at the
bottom.
Please note: In order to utilise this facility the TMC aerial must be plugged into the unit first BEFORE you go into the navigation
software.
At the top of the display, in the middle, a radio frequency will be displayed. If you just see five dashes then either the unit is currently
changing frequencies or the TMC aerial is not plugged in or has not been detected.
- Press this to search to the next available frequency. Pressing this will search
down the FM frequency band.
- Press this to adjust the radio frequency by one increment at at time. Pressing
this will move down the FM frequency band.
- Press this to adjust the radio frequency by one increment at at time. Pressing
this will move up the FM frequency band.
- Press this to search to the next available frequency. Pressing this will search up the FM frequency band.
- This is the auto tune facility. This is switched ON by default and will scan through the FM frequency band looking for a
TMC signal. Once a signal is established the unit will then collects packets of data. If you want to tune the frequency manually then
you need to remove the red tick from the AF box.
To save the changes press the 'OK' button at the bottom of the display.
If you wish to exit the TMC function without saving any changes press the return arrow located in the bottom right hand
corner of the display.
Return to contents
All manuals and user guides at all-guides.com
60 • EN
Use the arrows to
scroll up and down