Snooper SYRIUS PRO Guide De L'utilisateur page 37

3.13 Find by coordinate
To navigate to a location using a coordinate:
Press the centre of the screen to access the 'Navigate to' menu
● ●
Press the black arrow once
● ●
Press the 'Find by coordinate' icon
● ●
Enter the coordinate using the key pad and press the 'OK' button.
You can enter the coordinate in three different formats. For example.
Decimal Degrees
Latitude (N): 53.462968°
Longitude (W): -2.291367°
Please note: when inputting the Longitude you ignore the minus symbol (-) . The degree symbol
MUST be used in order for this function to work (see image on the right).
Degrees, Minutes, Seconds
Latitude (N): 53°27'45.95"N
Longitude (W): 2°17'28.16"W
Please note: when inputting the Longitude and Latitude you ignore the letters 'N' and 'W' . You
MUST use the degrees, minutes and seconds symbols when using this function (see image on the
right).
Degrees, Decimal Minutes
Latitude (N): 53° 27.766'N
Longitude (W): 2° 17.469'W
Please note: when inputting the Longitude and Latitude you ignore the letters 'N' and 'W' . The
degree and minute symbols MUST be used when using this function (see image on the right).
After pressing OK, the location of the coordinates will be shown on the map. If correct press 'Quick menu' and then 'Continue' and
follow the on screen instructions to calculate a route.
3.14 Re-route
6 SERIES can recalculate your route by avoiding certain roads or redirecting you by distance. This facility only becomes available once
you have calculated a route.
To perform a re-route:
● ●
Press the centre of the screen to enter the 'Navigate to' menu.
● ●
Press the black arrow once.
● ●
Press the 'Re-route' icon.
● ●
You can then choose how you would like to re-route your journey from the selections shown on the display.
In order to use this function on 6 SERIES you will need to have entered and calculated a route.
If the 'Re-Route' icon is greyed out a route has NOT been entered.
Return to contents
All manuals and user guides at all-guides.com
36 • EN