Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
BOILER FIXING
THE BURNER MUST BE INSTALLED IN CONFORMITY WITH LEGISLATION AND LOCAL
STANDARDS.
It is necessary that the insulating gasket (9, fig. 1) is placed between the boiler door and the burner
flange. This insulating gasket has six holes, which, if necessary, can be modified as shown on the
drawing on the right.
Verify that the installed burner is lightly leaned towards
the button. (See figure 2).
The burner is designed to allow
entry of the flexible oil-lines on
either side of the burner.
2666
D5242
Fig. 2
D5218
3
GB
BURNER FIXING
S7386
Publicité
Table des Matières
