Filling And Fitting The Blender; Selecting Operating Speeds; Filling While In Use - SilverCrest SSM 550 D1 Mode D'emploi

Filling and fitting the blender
1) Remove the blender
2) Fill the blender
Ensure that the pouring spout on the blender
3) Insert the measuring cap
clockwise.
4) Place the ready-filled and sealed blender
Turn the blender
start if the blender

Selecting operating speeds

Once the blender
block
Set the switch
■
Level 1–3
for liquids or soft foodstuffs, for mixing, blending and stirring
■ Level 3–5
for more solid foods or for chopping
■ Level Ice Crush/Clean
for short, powerful impulse operation, e.g. for crushing ice cubes or when
cleaning. To prevent overloading the motor, the switch
position. Therefore, hold the switch
NOTE
► Fill the blender
Otherwise, the ice cubes will not be crushed optimally.

Filling while in use

WARNING!
► If you want to add additional foods during operation, use only the measur-
ing cap
► Do NOT open the lid
speeds!
► Do not insert cutlery items or mixing tools into the blender
appliance is in use. There is a considerable risk of injury if these come into
contact with the swiftly rotating cutting blades
SSM 550 D1
All manuals and user guides at all-guides.com
from the motor block
and then press the lid
into the lid opening and secure it by turning it
gently until you can press it down. The motor will only
is securely fitted.
is filled, completely sealed and securely fitted to the motor
, you can then switch the appliance on.
to ...
with a maximum of 180 g of ice cubes.
provided for this purpose.
. Pieces of food could be thrown out at high
and remove the lid
firmly back onto the blender
is also closed.
onto the motor block
does not lock in this
in this position for short periods only.
while the
!
GB
.
IE
.
.
7